This pistol grenade is formed by adding to the egg-type hand grenade (Eierhandgranate 39) a plastic stem to which it is attached by a retaining tube. The tube contains the delay igniter at the forward end inside the grenade. An alloy flash tube connects this to the fuze which is located in the base of the stem. The fuze is separated from the primer by a safety pin which is pulled out before the grenade is placed in the pistol barrel. Upon firing, the firing pin strikes the primer which sets off the delay igniter, detonating the explosive charge after a delay of 4.5 seconds.
| Overall length | 6.89 ins. | |
| Maximum diameter | 3 ins. | |
| Color | Olive green | |
| Delay | 4.5 sec. | |
| Range | 80 yds. |
German: p. 324
This grenade, consisting of a rounded nose cap screwed to a cylindrical body, is equipped with four fins which are fixed to the base of the body. A brass or aluminum cartridge crimped to the grenade completes the assembly. A case containing the detonator and main filling is separated from a fixed firing pin in the nose of the grenade by a creep spring. The case is prevented from moving forward before firing by two metal balls in the base of the carrier. An arming rod inserted between the two balls prevents them from moving. This is forced out of the base by setback about ten or twelve yards after the grenade leaves the muzzle of the gun. The balls then slide out of their grooves and the case is free to move against the firing pin, exploding the grenade on impact.
These grenades are made in the form of glass flasks. Model 1H is a single container; Model 2H includes an inner glass tube filled with a solution of calcium chloride. The body of each grenade is filled with titanium tetrachloride which vaporizes, upon contact with the air. The calcium chloride permits the second model to operate at low relative humidity, whereas the first model produces a thin fog unless the air is quite moist. Both models discharge upon impact with any hard object.
The prototype of this grenade is comprised of the body of the smoke hand grenade 39 with a synthetic resin adapter to hold the B. Z. E. igniter. The Model 41 is of similar construction but the body has been modified so that the igniter fits into a small central neck without the use of an adapter. There are only two smoke holes instead of eight. The friction igniter operates with a 4-5 second delay, setting off a 2-minute smoke discharge.
This grenade closely resembles the high explosive stick grenade 24 in external form and size. However, instead of the high explosive filling this grenade is filled with a smoke mixture. There are eight holes in the base of the head through which the smoke escapes. The handle has three horizontal corrugations at the screw cap end to assist in differentiation by touch. Upon activation, smoke is emitted for a period of two minutes, forming an effective screen for machine gun nests and pillboxes.
This is a thin-cased offensive type grenade with a B. Z. E. friction igniter screwed into the top. The cylindrical body is made of aluminum and painted yellow. There are two models of this grenade, one 3 5/8 inches long and the other 4 inches long. This grenade may also be used as a booby trap by the insertion of a D. Z. 35 Pressure Igniter. To operate the grenade, the head of the igniter is unscrewed and pulled, drawing the wire through the friction composition and igniting the delay pellet. The grenade is then thrown and after a 4-5 second delay, the delay element initiates the detonator.
This grenade consists of a thin egg-shaped case filled with an explosive charge, and a friction type igniter with a delay pellet. The upper end of the friction wire in the igniter is attached to a disc in the head which screws on to the top of the body. In operation, the head is unscrewed and pulled, drawing the wire through the friction composition and igniting the delay pellet. After a delay of from 4 to 5 seconds the pellet initiates the detonator which in turn sets off the explosive filler.
The head of this grenade is a thin steel casing containing the explosive filler. This is screwed onto a hollow wooden handle through the center of which runs a double length of cord. This cord connects at the forward end to a friction pull igniter (B. Z. 24) and at the rear to a porcelain ball in a metal cap. In operation, the cap is removed, the porcelain ball pulled, and the missile thrown to detonate after a 4-5 second delay.
This grenade, a new type of offensive weapon, has no outer casing or cover, but consists merely of a disc cut from a pre-cast or pressed pellet of explosive, and an igniter. The disc, which is believed to be R.D.X./wax, is 3 5/16 inches in diameter and 17/32 inches thick. It is drilled to receive the igniter and detonator.