Tag: panzer 38t

Categories
German

Gw. für 15 cm s.I.G. 33/1 (Sd. Kfz. 138/1): S.P. Heavy Infantry Howitzer (on Czech Chassis)

Grille: Gw. für 15 cm s.I.G. 33/1 (Sd. Kfz. 138/1): S.P. Heavy Infantry Howitzer (on Czech Chassis)

The vehicle is the result of a combination of the 15 cm heavy infantry howitzer and the Pz. Kpfw. 38 (t) tank chassis. Its road performance will approximate that of the Pz. Kpfw. 38 (t) tank.

The howitzer, from which the trail has been removed, is mounted well forward on the chassis within a box-like, open top shield, the front plates of which overlap the original gun shield. The box shield has a thickness of 25 mm in front, 15 mm at the sides, and 15 mm at the rear. A further plate, fitted over the barrel and recuperator, is elevated and depressed with the howitzer, which also retains its original traversing and elevating mechanisms. Sighting is done through the aperture in the howitzer shield, by dial sight. Six metal sheets in the shape of a 3/4 circle are fitted to the sides of the fighting compartment, four vertically at the rear on the right, and two horizontally forward on the left. These may house a shell each, thus making a total of twelve rounds, corresponding to the 12 lockers for cartridge cases and charges. AW/T set is carried. This is mounted on the left wall of the fighting compartment. A folding type rod aerial is mounted on the left. The general appearance suggests that the equipment is overloaded. The silhouette is high.

The piece, a standard German infantry support weapon, has a length of 64.57 inches, a muzzle velocity of 790 f.s., and a maximum effective range of 5140 yards. Its field mounting traverse is reported as 11°, its elevation 0° to plus 73°. Its recoil mechanism, which consists of both buffer and recuperator, is housed in a casing underneath the barrel and extends almost the entire length of the latter. The gun fires an 83.6 lb. H.E. shell, and an 84.7 lb. smoke shell.

SPECIFICATIONS

Weight         (approx.) 12 tons
Length 15 ft., 3 ins.
Width 7 ft.
Height
Ground clearance 15 ins.
Tread centers 5 ft., 9 1/2 ins.
Ground contact 8 ft., 6 3/4 ins.
Width of track 11 ins.
Pitch of track 4 1/2 ins.
Track links 89
Fording depth 3 ft.
Theoretical radius of action
     Roads 140 miles
     Cross-country 100 miles
Speed
     Roads 25 m.p.h.
     Cross-country 15 m.p.h.
Armor
     Front plate 25 + 25 mm
     Sides 30 mm
Armament 15 cm. s.I.G. 33
Ammunition (rds.) 12
Engine Praga 6-cyl., 125 h.p., gasoline
Transmission 5 speeds forward, 1 reverse
Steering Epicyclic clutch brake
Crew 3

German: p. 20

Categories
German

Pz. Jäg. 38 für 7.5 cm Pak 40/3 (Sd. Kfz. 138): S.P. Antitank Gun (on Czech Chassis)

Pz. Jäg. 38 für 7.5 cm Pak 40/3 (Sd. Kfz. 138): S.P. Antitank Gun (on Czech Chassis)

The equipment consists of the 7.5 cm Pak 40 mounted on a turretless chassis of a Pz. Kpfw. 38 (t) tank of Czech origin, formerly known as the L.T.H. This mount was used by the Germans in large numbers on the Russian front. It usually moves just in the rear of the first wave of tanks. Its road performance approximates that of the Pz. Kpfw. 38 (t) tank.

Due to the bolted construction of the parent vehicle the removal of the turret, superstructure top plate and the engine access hatches of the original tank is readily accomplished and the mounting of the anti-tank gun is speedily performed. The turntable of the anti-tank gun is bolted to the angle section formerly carrying the superstructure top plate of the original tank. The gun shield is constructed from 10-15 mm plate. It is open at the top and rear. The protection afforded the crew is little better than would be found on a field piece.

The gun, which projects well beyond the front of the hull, is of monobloc, loose barrel construction, and is fitted with a double baffle muzzle brake. The breech ring is rectangular and is secured to the barrel by a loose screwed collar. The recoil mechanism is attached underneath the ring by a detachable lug. The elevating and traversing mechanisms are controlled by hand wheels. The gun has the following muzzle velocities: HE 1800 f.s.; A.P.C., 2525 f.s; hollow charge 1476 f.s. The A.P.C. shell will penetrate homogeneous armor as follows: 500 yards 4.0 ins. at 30° obliquity, 4.8 ins. normal—1000 yards 3.6 ins. at 30°, 4.3 ins. normal—2000 yards 2.8 ins. at 30°, 3.4 ins. normal—2500 yards 2.5 ins. at 30°, 3.0 ins. normal. The gun has a traverse of 65° and an elevation of -5° to + 22°.

SPECIFICATIONS

Weight         (approx.) 11 tons
Length 15 ft., 3 ins.
Width 7 ft.
Height 7 ft., 2 ins.
Ground clearance 15 ins.
Tread centers 5 ft., 9 1/2 ins.
Ground contact 8 ft., 6 3/4 ins.
Width of track 11 ins.
Pitch of track 4 1/2 ins.
Track links 89 ins.
Fording depth 3 ft.
Theoretical radius of action
     Roads 140 miles
     Cross-country 100 miles
Speed
     Roads 25 m.p.h.
     Cross-country 15 m.p.h.
Armor
     Front plate 25 + 25 mm
     Sides 30 mm
Armament 7.5 cm. Pak 40
M.G. 37 (t)
Ammunition (rds.)
Engine Praga 6-cyl., 125 h.p., gasoline
Transmission 5 speeds forward, 1 reverse
Steering Epicyclic clutch brake
Crew Probably 4

German: p. 19

Categories
German

Pz. Kpfw. 38 (t): Light Tank (Czech)

Pz. Kpfw. 38 (t): Light Tank (Czech)

This is the Czech tank L.T.H. The chassis of this vehicle is frequently converted by the Germans for use as a self-propelled mount for artillery pieces, such as the 7.5 cm. Pak 40 and 7.62 cm. Pak 36 (r) anti-tank guns, and the 15 cm. s.I.G. 33. The primary characteristics of the Pz. Kpfw. 38 (t) are its four large Christie-type bogie wheels of equal size; two top rollers forward; flat-topped turret with prominent cupola, and a square gun mantlet covering the whole front of the turret.

The turret is round with a square front. It has a traverse of 360° and an internal diameter of about 48 inches. Its floor does not revolve. The traversing gear, which is fast and light in action, is operated by a wheel on the left-hand side of the gunner. The bulge at the rear of the turret is fitted for ammunition storage.

All main construction is riveted with the exception of the top of the superstructure, which is bolted. The turret front has a basic armor of 25 mm with an additional 25 mm plate. The front vertical plate is similarly armored; the side superstructure armor is 30 mm in thickneses.

The suspension consists of four 30-inch diameter rubber-tired wheels on two bogies with half elliptic springs, a high front sprocket 22 1/4 inches in diameter and a rear idler. There are two return rollers mounted well forward. The track is of the outside center guide type, with single pin secured by circular clip.

The tank is powered by a Praga T.N.H.P.S. O.H.V. 6-cylinder, water-cooled, gasoline engine, rated 125 h.p. at 2200 r.p.m. The ignition is Bosch magneto.

The armament consists of a 3.7 cm. gun and one light machine gun coaxial in the turret, and one light machine gun in the front superstructure.

SPECIFICATIONS

Weight         10 tons
Length 15 ft., 3 ins.
Width 7 ft.
Height 7 ft., 2 ins.
Ground clearance 15 ins.
Tread centers 5 ft., 9 1/2 ins.
Ground contact 8 ft., 6 3/4 ins.
Width of track 11 ins.
Pitch of track 4 1/2 ins.
Track links 89
Fording depth 3 ft.
Theoretical radius of action
     Roads 140 miles
     Cross-country 100 miles
Speed
     Roads 26 m.p.h.
     Cross-country 18 m.p.h.
Armor
     Front plate 25 + 25 mm
     Sides 30 mm
Armament One 3.7 cm. gun
Two light M. G.’s
Ammunition (rds.)
Engine 125 h.p. Praga O.H.V.
Transmission 5 speeds forward, 1 reverse
Steering Epicyclic clutch brake
Crew 4

German: p. 18

Categories
German

Pz. Jäg. 38 für 7.62 cm Pak 36 (r) (Sd. Kfz. 139): S.P. Antitank Gun (on Czech Chassis)

Pz. Jäg. 38 für 7.62 cm Pak 36 (r) (Sd. Kfz. 139): S.P. Antitank Gun (on Czech Chassis): Marder III Panzerjäger

This vehicle is an ex-Czech light tank chassis mounting a Russian 7.62 cm Pak 36 (r). The mechanical layout and components are identical with those of the Pz. Kpfw. 38 (t) tank and its road performance will therefore be similar.

The conversion to a self-propelled mounting has been achieved by the removal of the turret and the superstructure top plate of the original tank. The turntable for the gun is mounted on the superstructure at four points on transverse and lateral beams. A three-sided shield of 10 mm plate is secured by bolting and welding to the original front gun shield, and by tubular supports to the mounting. This shield traverses with the gun. A sliding mantlet is provided in the shield to permit elevation and depression of the gun. A lower, fixed three-sided shield is bolted to the superstructure. This is of 15 mm plate. The sloping side covers have been replaced by flat hatches hinged to the sides.

The gun is of monobloc construction with detachable breech ring. It has an over-all length, including the double baffle muzzle brake and breech lock, of 163 1/2 ins. The elevating gear is driven from a handwheel, on a traverse axis, on the left of the gun. The traversing gear is hand operated from the right. The gun has the following muzzle velocities: HE shell, 1805 f.s; A.P.C. shell, 2430 f.s. The penetration performance firing A.P.C. shell against homogeneous armor is as follows: 500 yards 3.7 ins. at 30° obliquity, 1000 yards 3.2 ins. at 30°, 4.1 ins. normal—2000 yards 2.5 ins at 30°, 3.1 ins. normal—2500 yards 2.2 ins. at 30°, 2.8 ins. normal.

Additional armament on this vehicle consists of a 7.92 M.G. 37 (t) on a ball mounting in front superstructure; Discharger for 5 smoke generators, fired by cable from fighting compartment; 9 mm machine carbine.

SPECIFICATIONS

Weight         11 tons
Length 15 ft., 3 ins.
Width 7 ft.
Height 8 ft., 1 1/2 ins.
Ground clearance 15 ins.
Tread centers 5 ft., 9 1/2 ins.
Ground contact 8 ft., 63 ins.
Width of track 11 ins.
Pitch of track 41 ins.
Track links 89
Fording depth 3 ft.
Theoretical radius of action
     Roads 140 miles
     Cross-country 100 miles
Speed
     Roads 25 m.p.h.
     Cross-country 15 m.p.h.
Armor
     Front plate 25 + 25 mm
     Sides 30 mm
Armament 7.62 cm Pak 36 (r)
7.92 mm M.G. 37 (t)
Ammunition (rds.) 7.62 cm gun 28
M.G. 1500
Wt. of Projectiles
     A.P.C. 16.7 lb.
     H.E. 12.6 lb.
Engine Praga 6-cyl., gasoline, 125 h.p.
Transmission 5 speeds forward, 1 reverse
Steering Epicyclic clutch brake
Crew 4

German: p. 21

Categories
German

Pz. Jäg. 38 für 7.5 cm Pak 39 (L/48): Self-Propelled Antitank Gun

Pz. Jäg. 38 für 7.5 cm Pak 39 (L/48): Self-Propelled Antitank Gun

The chassis of this self-propelled antitank gun is a modified version of the chassis for the Czech Model 38 tank. The lower nose of the hull is 60 mm thick set at 40° and interlocked with the sides and upper nose plate. The upper nose plate is 60 mm thick. It is positioned at an angle of 60° and extends to the top of the superstructure. Brinell hardness is approximately 240. All-welded construction is employed except in attaching roof and superstructure rear plates which are bolted on for reasons of accessibility. The two latter plates are 8 mm horizontal and 8 mm at 70° respectively. The side superstructure plates are 20 mm set at 40° with a brinell hardness of approximately 195. The hull floor plate is 10 mm. Side apron plates of 5 mm give added protection against high explosive shell fire.

The 7.5 cm Pak 39 (L/48), mounted 15 inches to the right of the hull center line, has an improved type of recoil mechanism. This allows the muzzle brake to be discarded. Elevation is from -6° to +10°. Traverse overall is 16° (-11° right -5° left). A new type machine gun mount is built in the roof. The machine gun is fitted with a periscopic sight and extended trigger, and may be traversed in any direction and fired from within. A Sfl ZF 1a sight and an episcope is provided for the main gunner. The sight projects through the roof. The loader has an episcope fitted in the rear portion of his hatch fixed at 6 o’clock.

The steering mechanism is the usual controlled differential type which allows curves of 29½ foot radius without “steering losses.” Curves of smaller radius are obtained by using the track brakes of the additional clutch brake system also provided.

There are two fuel tanks with a total capacity of 85 gallons. Ground pressure is 11.9 pounds per square inch. The power to weight ratio is approximately 9 HP per ton. The Fu 5 radio is fitted. Commanders equipments carry an additional Fu 8.

SPECIFICATIONS

Weight in action       17.6 tons
Length (overall excluding gun) 15 ft., 11 ins.
Width (overall) 8 ft., 7 1/8 ins.
Height (overall) 6 ft., 10 1/2 ins.
Ground clearance 1 ft., 4 3/4 ins.
Tread centers 6 ft., 10 1/2 ins.
Ground contact 8 ft., 11 1/2 ins.
Width of track 1 ft., 1 3/4 ins.
Pitch of track 4.1 ins.
Track links 96
Fording depth 2 ft., 11 ins.
Theoretical radius of action
     Roads 100 miles
     Cross-country 50 miles
Speed
     Roads 16 m.p.h.
     Cross-country 9 m.p.h.
Armor
     Hull nose plate (lower) 60 mm at 40°
     Hull side plate 20 mm undercut 15°
     Hull tail plate 20 mm at 15°
     Glacis plate (upper nose) 60 mm at 60°
     Superstructure side plates 20 mm at 40°
     Superstructure rear plate 8 mm at 70°
     Gun mantlet 30 mm rounded
Armament 7.5 cm Pak 39 (L/48); one M. G. 34; one M. G. 44.
Ammunition (Rds.) 7.5 cm gun, 41 rds.; M. G. 34, 600 rds.;* M. G. 44, 180 rds.
Engine Czech EPA (Type TZJ), 6-cyl., inline, 158 hp. at 2,600 r.p.m.
Transmission 5 speeds forward, 1 reverse
Steering Epicyclic, clutch brake type
Crew 4

*In addition to the ammunition mentioned above, 12 rounds of signal ammunition, 20 egg hand grenades, and 6 smoke candles are carried.

German: p. 20.1 (April 1, 1945)